2008 g35 auto roll up.

Last week I installed a compustar 6200 series start with idtalink al ca module in a 2008 infinity g35 sedan. All went well, no issues, but owner called today and said the auto window roll up isn't working. Actually, I did have to disconnect battery to reset " service engine soon" light because the car didn't start first attempt, battery was low from interior lights but it hasn't come back and remote starter works asit should every start.   I've done several of these using automate am 6 with dlpk and no issues. I haven't had a Chance to look at yet , but was wondering if anyone knew of a possible reset procedure, like for the Honda pilots.?(4)g5-1244, (4)gtr12, (2)ppipcx2400, (1)pcx4125, (1)pc4800.2, (3) pair mb quart 6.5"Q, (4)optimas, alumapro (1)5 and(1)15 farad cap, premier deh-p860mp, pioneer xm -dual H.O. alternators

Yah basically same reset procedure. Roll window down. Roll window up. When fully closed keep holding for 3 seconds. Same with auto down.

The window relearn procedure is detailed in the owners manual. Tell them to read it. :)Kevin Pierson

Thanks. I figured so, but I wanted check before hand. They are good friends of mine, don't want to leave them hanging.   I asked several installers at work and they had no clue. (4)g5-1244, (4)gtr12, (2)ppipcx2400, (1)pcx4125, (1)pc4800.2, (3) pair mb quart 6.5"Q, (4)optimas, alumapro (1)5 and(1)15 farad cap, premier deh-p860mp, pioneer xm -dual H.O. alternators