the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2012 Dodge Journey Headrest Monitors


Post ReplyPost New Topic
< Prev Topic Next Topic >
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 12, 2012 at 12:02 PM / IP Logged  
I have a customer that would like to add rear seat video in a 2012 Dodge Journey. I could install a overhead flip-down monitor but I would have to relocate the rear seat climate controls. I would rather not deal with the hassle of the relocation and the customer doesn't really care to pay for the extra labor to do so. I would like to add pre-fabed headrest monitors but the vehicle is equipped with active headrests. So my question is does anyone know of a company that makes replacement monitors for vehicles with active headrests? Is there a way that I can place a resistor in the 2-pin active headrest monitor plug so the vehicle thinks the factory headrests are there and the rest of the airbag system isn't disabled. I tried unplugging the active headrests and starting the vehicle and the airbag light pops up on the dash. Has anyone had any experience with the active headrests? I know I can probably make a template to mount a screen on the backside of the factory headrest but I would like to find a less labor intensive solution. Any advice?
I drink current, eat ohms, and bleed voltage
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 12, 2012 at 12:16 PM / IP Logged  
I think you're S.O.L. Best bet is probably to just make a template as you said. But cant you just cut into the headrest and pressure fit the monitor into the headrest provided you have enough room to fit the monitor in there depth wise.
bp
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 12, 2012 at 12:29 PM / IP Logged  
I can't cut out the back of the headrests because the whole thing is a place shield that protects the mechanism for the active headrest. From what I have gathered, the active headrests are designed to prevent head injuries caused by a person(s) getting into an accident and the front passengers heads are thrown back against the headrests. Of course, the airbags must deploy in order to activate the active headrests.
I drink current, eat ohms, and bleed voltage
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 12, 2012 at 1:19 PM / IP Logged  
Oh, okay. Yeah, then I think the only thing I think you can do at this point is just make a template for the monitor unfortunately. But wouldn't it be cheaper and easier to just move the climate controls provided there aren't any HVAC lines going to the controls in the back and mount the overhead instead?
bp
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 12, 2012 at 2:08 PM / IP Logged  
Yeah it would be cheaper. I was just throwing ideas out there to see if anyone has tackled this obstacle. I'm thinking that relocating the climate controls is gonna be my only option provided there isn't any other aftermarket solution. FYI, there aren't any HVAC lines in the headliner on this vehicle.
I drink current, eat ohms, and bleed voltage
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 12, 2012 at 2:17 PM / IP Logged  
Ok. I would just do the relocation of the climate controls therefore if anything happens later down the road with the SRS system, on the customers end, they can never blame it on you. So yeah, your best bet is to just relocate the controls and put the overhead in its place, BUT I would get some sort of consent from the customer stating you hold no liability nor responsibility for any damages as if the customer decides to change their mind after the install, you aren't stuck paying for new panels that you had to modify for the controls, as well as the headliner. Just my $.02. Good luck and post some pictures of it when you're all done.
bp
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 13, 2012 at 2:21 PM / IP Logged  
Thanks for your $0.20 lol. I will talk to the customer and see what they want to do. Hopefully its a go and I'll have the chance to post some pictures.
I drink current, eat ohms, and bleed voltage
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: January 15, 2012 at 10:12 AM / IP Logged  

We do these all the time. Rosen makes a system for this car(same as the Caravan and some Mercedes active headrests) that mounts to the posts instead of the headrest itself. They never touch anything above the plastic that the posts slide into. Check out this link...

http://www.rosenentertainment.com/AV7700%20Sell%20Sheet%20-%20Oct%202011.pdf

Mike M2
Tech Manager
CS Dealer Services
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 15, 2012 at 10:21 AM / IP Logged  
I have seen screens that mount like that from every brand and every budget, but I personally think they look really, REALLY chinsey and cheap. But to each their own and it is entirely up to the customer to see if they want it. Even Pyle makes them and the picture is just as good as Rosen...just because they are such small screens, you wont notice a difference between an expensive brand and a cheap brand, at least not much of a difference and I have had Rosen and Pyle lol that's how I know.
bp
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 15, 2012 at 3:22 PM / IP Logged  
Thanks for the input. I wasn't aware that these were available. I'll have to do some further research and see how the customer feels about them. By the way, does anyone have a install manual for the Rosen AV7700? I couldn't find one via Google or on Rosen's website.
I drink current, eat ohms, and bleed voltage
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, October 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer