the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Air Ride, Popping Noise in Speakers


Post ReplyPost New Topic
< Prev Topic Next Topic >
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 14, 2012 at 8:41 PM / IP Logged  
Yes a 1n4001 will work fine.  Any thing between and including 4001 and 4007.
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 14, 2012 at 8:56 PM / IP Logged  
Thank you!
bp
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 14, 2012 at 9:01 PM / IP Logged  
I also have another question for the same car, its a 96 eclipse. I did a taillight conversion which doesn't require all the taillight bulbs, I have heard you can stick a resistor in the bulb socket to prevent the rapid light flash that a bulb is out. Is this true? If so, what resistor would I need per side? Thanks.
bp
Ween 
Platinum - Posts: 1,368
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: January 14, 2012 at 9:36 PM / IP Logged  
6 ohm 50 watt. you could go slightly less wattage (35?) if the signals and hazards are used infrequently. mounting the resistors to metal..aluminum? for a heat sink wouldn't hurt either. if the flasher is a two wire type, you could also get a flasher that isn't load dependent, may require an additional ground wire.
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 15, 2012 at 9:56 AM / IP Logged  
Okay, thanks for the help and I just ordered the diodes online from HongKong... $0.99 for 25 pieces but it takes like a month to get here. Good thing I am not in a hurry. Going to start the fiberglassing of everything.
bp
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, November 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer