the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2 wires on pin 87


Post ReplyPost New Topic
< Prev Topic Next Topic >
01sesedan 
Member - Posts: 40
Member spacespace
Joined: January 04, 2003
Location: Florida, United States
Posted: January 17, 2012 at 4:15 PM / IP Logged  
This is for a 1999 Jeep Cherokee XJ.
Currently upgrading the headlight wiring harness to 10 gauge. I'm using 30 amp relay for low beam and 40 amp for high.
I know a dual 87 pin relay would work but don't have on me.
I was thinking of using an 8 gauge butt connector. Twist together both low beams and crimp to one end of the butt connector. Then come out the other side of the butt connector with a singe 10 gauge to the relay using 10 gauge quick disconnect female spade. Will this also work.
Thanks
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 18, 2012 at 4:34 PM / IP Logged  
Don't use butt connectors, use SOLDER! But yes, that should work.
bp
01sesedan 
Member - Posts: 40
Member spacespace
Joined: January 04, 2003
Location: Florida, United States
Posted: January 18, 2012 at 9:15 PM / IP Logged  
Didn't think about solder. Guess I was over thinking the setup.
Now I have to locate a ceramic h4 connector that I can put together.
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 19, 2012 at 1:43 PM / IP Logged  
Good luck, but remember, if you try an cheap out, you're going to spend more and something WILL go wrong, I have done it myself a couple of times and it is not worth it!
bp
01sesedan 
Member - Posts: 40
Member spacespace
Joined: January 04, 2003
Location: Florida, United States
Posted: January 19, 2012 at 2:25 PM / IP Logged  
Has any used 4 relays? One for each low and high beam.    Someone indicated it might be a better setup.   way if a relay goes bad, I only loose one instead of both.
I have plenty 87 and 87a relay in both 30 and 40 amps.
Problem is find the correct location under the hood for this setup. Not too much space under the hood of an XJ cherokee.
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 19, 2012 at 4:12 PM / IP Logged  
Here you go with 2 relays.2 wires on pin 87 - Last Post -- posted image.
bp
01sesedan 
Member - Posts: 40
Member spacespace
Joined: January 04, 2003
Location: Florida, United States
Posted: January 22, 2012 at 12:02 PM / IP Logged  
Thanks. Will start working on it once the ceramic connectors come in....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer