the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

door panel molding


Post ReplyPost New Topic
< Prev Topic Next Topic >
delory90 
Member - Posts: 1
Member spacespace
Joined: January 18, 2012
Location: Arizona, United States
Posted: January 18, 2012 at 10:44 AM / IP Logged  

Hi, i bought an 84 F 150 a few months back and I finally have the money to fix it up. The interior was completely shot when i got it. Not a big deal since I planned on redoing it anyway.

This is going to be my first fiberglassing experience, but I've been researching and looking into it for a while now. So any help and advice is greatly appreciated.

I bought some nasty doorpanels from a junkyard and i plan on making new ones from scratch. I was hoping to create some kind of mold for the backside so i can easily match up the mounting holes. I'm having trouble figuring out what i can use to create the mold though. I have tried some "sprayable rubber" as well as multiple small blocks of the green flower foam. Neither gave me the results i was hoping for. Hopefully one of you guys can point me in the right direction. Thanks.

xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 18, 2012 at 4:19 PM / IP Logged  
for fiberglassing things, the best site for info is fiberglassforums.com I learned tons from those guys.
bp

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer