viper 5704 door lock

Home / the12volt's Install Bay / Car Security and Convenience / viper 5704 door lock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

94lsxs10

Member - Posts: 4

Joined: January 22, 2012

Location: New York, United States

Posted: January 22, 2012 at 6:28 PM / IP Logged

So I installed a Viper 5704 (replacement for 5901) this weekend. I have everything working except the door locks. The unlock wire is normally open, when the unlock is pressed on the remote it pulses to ground. The lock wire comming from the alarm is the exact opposite. I followed the dei 1070 diagram to contol the locks, but in order for this to work I need a - pulse from my alarm during the lock command. Does anyone know how I can change the lock pulse to work for my needs?

From the quick reference guide.

The unlock wire is (-) 500ma
The lock wire is (-) 500ma

94lsxs10

Member - Posts: 4

Joined: January 22, 2012

Location: New York, United States

Posted: January 22, 2012 at 6:30 PM / IP Logged

Forgot to add the car information its a 2005 lexus is300. Damn noob. viper 5704 door lock - Last Post -- posted image.

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: January 22, 2012 at 6:48 PM / IP Logged

If you look up your vehicle in bulldogsecurity wire info section, they give a nice diagram of what you need to do and what wire colors are in the vehicle.

Advanced

94lsxs10

Member - Posts: 4

Joined: January 22, 2012

Location: New York, United States

Posted: January 22, 2012 at 7:56 PM / IP Logged

dasbogie wrote:

If you look up your vehicle in bulldogsecurity wire info section, they give a nice diagram of what you need to do and what wire colors are in the vehicle.

The wiring is the same as the dei 1070 document I used. The trigger wire from the alarm won't activate the relay. If I manually ground the relay ( to simulate the alarm) the door locks. Is it possible the brain might be bad?

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: January 22, 2012 at 7:59 PM / IP Logged

you could try using the arm wire from the viper to trigger the relay, should be GREEN / WHITE

Advanced

94lsxs10

Member - Posts: 4

Joined: January 22, 2012

Location: New York, United States

Posted: January 22, 2012 at 8:33 PM / IP Logged

You sir are the man. I don't know why I didn't think to try that sooner. I'm still going to call in the morning to find out why the lock isn't sending a (-). Atleast I have another solution.

bens300

Member - Posts: 12

Joined: December 22, 2003

Location: United States

Posted: December 09, 2012 at 3:15 PM / IP Logged

Im having the exact same problem. Did you figure out what was wrong?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5704 door lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.