wiring my aftermarket headlights

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / wiring my aftermarket headlights (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mujahid

Member - Posts: 11

Joined: October 02, 2010

Location: Trinidad and Tobago

Posted: February 02, 2012 at 7:51 PM / IP Logged

i recently change my headlights on my es8 civic. the original bulbs were h4 but this one come with two h1 bulbs one for high and one for low. when i turn on the high beam the low beam comes of i think this is the way it is suppose to work. is there any way i could wire this for both lamps to come on when i turn on the high beam.

@0 Hertz Xpertz/Team SPL

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: February 03, 2012 at 1:11 AM / IP Logged

A diode (IN4004 etc) from the hibeam relay coil with the diode's line towards the lowbeam relay coil.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring my aftermarket headlights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.