2012 cruze, dball

Home / the12volt's Install Bay / Car Security and Convenience / 2012 cruze, dball (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: February 21, 2012 at 1:22 PM / IP Logged

accy wire is working properly.

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: February 21, 2012 at 1:31 PM / IP Logged

Are the locks trunk working? If so it programmed. But with my Idatalink software I have to program it at least 3 times before i get to start make sure you wake up the can bus before programming

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: February 21, 2012 at 1:56 PM / IP Logged

i got it to remote start,i noticed the ign was only coming on for a split second,so i disconnected the ign feed wire from the dball and used the secong ign wire fron remote start unit directly to ign wire at bcm-still didn't start.i noticed the ign came on before the accy so i put a relay on the ign wire and it works.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2012 cruze, dball

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.