cranks but no start python 1401/pkall

Home / the12volt's Install Bay / Car Security and Convenience / cranks but no start python 1401/pkall (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 29, 2012 at 2:21 PM / IP Logged

that vehicle has

1-start

2-ign

1-acc

are you sure you powered everything up? since we narrowed it down to be a non-bypass issue (as you stated you tried to start with key in the cylinder) its most likely wiring. on the next failed start, turn the key to the ign position and attempt to remote start. if it starts you have missed an ignition wire.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

kog506

Member - Posts: 29

Joined: February 05, 2012

Posted: February 29, 2012 at 3:27 PM / IP Logged

Okay so it happened again. Its because of the bypass. I tested by sitting in the car and RS using the key fob. The engine immbolization light in the instrument cluster did not turn off. It kept flashing while the remote start was cranking. I guess the i need to do the W2W instead of D2D.

Back to Top

kog506

Member - Posts: 29

Joined: February 05, 2012

Posted: February 29, 2012 at 11:10 PM / IP Logged

I haven't fix it yet by it seems like it start up w/o any problem if weather is colder?. I RS start it earlier ~3 hours ago. 61 Degrees. >:-(

Back to Top

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: March 01, 2012 at 6:06 AM / IP Logged

yes, try changing to w2w and reprogramming it to the car. This is exactly why I HATE d2d with dei units. Its very unreliable... where-as a few extra minutes during install would have saved a ton of headache.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cranks but no start python 1401/pkall

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.