honda oem door lock actuator

hi guys, i already finish my first project which is my remote starter. Now my second project is the keyless entry using honda oem actuator, the driver side actuator has 4 wire in it, the colors are black, blue/white, WHITE/ red, yellow/red and the passenger side actuator has 2 wires which is WHITE/ red and yellow/red. the question is how can i connect these wires to my remote starter and which wire goes to which wire to make it work and lastly what are the things that i need. thank you.

Model and year please.

i got the actuator from pick n pull, my car is a civic hatch 1999 cx..

GREEN / WHITE NEG lock GREEN/ orange NEG unlock Driver kick panel.

Forget my last post, I'm now assuming these are used parts you will be installing because your vehicle doesn't have central locking. 1)Buy a 451, add it to your R/S and wire in parallel the GREEN/ black to each motor WHITE/ red and the blue black to each motor yellow/red. Only thing that worries me is that you mentioned a factory OEM fob in a previous post. Is there or isn't there existant WORKING central locking in your car?

howie ll wrote: Forget my last post, I'm now assuming these are used parts you will be installing because your vehicle doesn't have central locking. 1)Buy a 451, add it to your R/S and wire in parallel the GREEN/ black to each motor WHITE/ red and the blue black to each motor yellow/red. Only thing that worries me is that you mentioned a factory OEM fob in a previous post. Is there or isn't there existant WORKING central locking in your car?

yup..there is no central locking system in my car..i will convert it to auto lock...do i just need one 451 relay for both side? how about this? https://www.the12volt.com/doorlocks/page3.asp#4w if your not busy can you draw me a schematic diagram of the connection.. thank you..

On the relay page "5 wire alternating" or 1 x 451 which should plug straight into DEI and possibly Compustar.

howie ll wrote: On the relay page "5 wire alternating" or 1 x 451 which should plug straight into DEI and possibly Compustar.

thank you for the reply.. i understand now. but if im not gonna put switch in it i don't need to wire the pin 87A right? and can i just use to relay for left and right door or in need 2 each door? and another thing is there any kind of this relay because i found one like this in princess auto it has the same pin.. thank you..

It won't work if 87a isn't wired, the motor wires need to "sit" on ground at rest to work hence 87a going to ground.

you were saying that if im not gonna put switch in it i should put the 87a wire to the body ground of the vehicle? thank you..