1991 Ford Mustang

Home / the12volt's Install Bay / Car Security and Convenience / 1991 Ford Mustang (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

BWhitie

Member - Posts: 1

Joined: May 04, 2003

Location: United States

Posted: May 04, 2003 at 11:36 AM / IP Logged

I have a 91 Ford Mustang GT with the power options (locks and windows) with a Viper alarm installed in it when I bought the car off of the previous owner. I no longer want that system in my car and have no experience with car security and or alarm systems. Is there any wiring diagrams or etc available to show me a schematic of the wires and hook ups for the system so I am aware of what I am doing when pulling out the old system and installing a new one.

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: May 04, 2003 at 1:52 PM / IP Logged

If you have no experience than you should bring it to shop. It will save you lot of headache.

Good luck........

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 04, 2003 at 10:05 PM / IP Logged

| 12V|yellow |+ |ignition harness |

Notes:

*1 Plug at driver's front corner of engine on 4 cyl, coil at driver's shock tower on 8 cyl. *2 This is for low and high speed. For intermittent there is a dark green which pulses. Add the two signals together with diodes.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1991 Ford Mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.