side marker wiring

Home / the12volt's Install Bay / Relays / side marker wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: May 07, 2012 at 6:12 AM / IP Logged

I meant one resistor per side (so that the other side doesn't also partly flash).

The resistor would only cook if undersized. I was assuming a 3W bulb etc, hence maybe a 22 to 33 Ohm 2W resistor...

Back to Top

itsyuk

Silver - Posts: 505

Joined: February 23, 2010

Location: United States

Posted: May 07, 2012 at 12:07 PM / IP Logged

what if the "resistor" was just another bulb hidden in series with the park light wire?

yuk

quiet rural missouri, near KC.

If your system moves you physically and not emotionally, you have wasted your money.

Back to Top

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: May 07, 2012 at 4:33 PM / IP Logged

Yep - that was to be one of my suggestions...

That means under 1/2 brightness for park lights.

And that's one (extra) bulb for each side AFTER the diode.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

side marker wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.