the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3303v viper alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
mikeri 
Member - Posts: 3
Member spacespace
Joined: May 11, 2012
Posted: May 26, 2012 at 12:13 AM / IP Logged  

wiring diagram for aviper 3303v alarm. 1998 chevy pickup no power door locks.no power windows.no remote start

lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 11, 2012 at 6:30 AM / IP Logged  
DIRECTWIRE™ WIRING INFORMATION - CHEVROLET / SILVERADO / 1998 / Security
[PRINT THIS PAGE]
12volts red (40A) + ignition harness
Starter yellow or purple + ignition harness
Ignition pink + ignition harness
Power Lock lt. blue 5wire or + drivers kick panel
Notes: 5 wire (type C) on the two door models, and positive trigger (type A) on the four door and keyless entry models.
Power Unlock white 5wire or + drivers kick panel
Notes: 5 wire (type C) on the two door models, and positive trigger (type A) on the four door and keyless entry models.
Lock Motor gray 5 wire drivers kick panel
Unlock Motor tan 5 wire drivers kick panel
Disarm Defeat tan 5 wire passengers kick panel
Parking Lights+ brown + headlight switch
Parking Lights-       
Hazards       
Turn Signal(L)       
Turn Signal(R)       
Door Trigger purple - headlight switch
Dome Supervision gray - headlight switch
Trunk/Hatch Pin       
Hood Pin       
Trunk/Hatch Release       
Power Sliding Door       
Factory Alarm Arm       
Factory Alarm Disarm       
Disarm No Unlock       
Tachometer white ac instrument cluster (gas or diesel) or ECM, plug labeled white (gas)
Notes: ECM located on driver side inner fender well.
Horn Trigger black - steering column
Memory Seat 1       
Memory Seat 2       
Memory Seat 3       
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
Passlock II
Part #: GMBP
Alternate Part1 #: PLJX
Alternate Part2 #: 556LW
Alternate Part3 #: 555LW
Alternate Part4 #: DesignTech 20402
Alternate Part5 #: DesignTech 29402
Notes:
      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer