530t 1999 ford explorer

Home / the12volt's Install Bay / Car Security and Convenience / 530t 1999 ford explorer (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

nextelmike

Member - Posts: 19

Joined: July 19, 2012

Location: South Carolina, United States

Posted: August 11, 2012 at 4:01 PM / IP Logged

in reply to this post I tested the 530T by switching the driver and passenger wires of the 530T and found that the side that controls the "driver side" window was not working (burned out or defective) so i replaced the 530T and it works perfectly! the wiring in the directions of the 530T are pretty straight forward this was an erroe on my part sorry for the confusion...

NExtelmike

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 11, 2012 at 4:33 PM / IP Logged

You just need to ground 85 to serif that brings on the domelight. If so check the black yellow to make sure it's go ing to ground on alarm off.

If not adjust the programming accordingly.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

530t 1999 ford explorer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.