ford territory tx 2007 alarm wiring

Ford Territory TX 2007 Alarm Wiring

i have a Ford Territory TX 2007

i am chasing wiring to install an add on alarm to the vehicle

most important ones i need are - lock / unlock sensing wires(bcm controlled)

and hopefully a bcm wiring diagram and location? can anyone help me. thanks

Did you check these sites: www.readyremote.com www.bulldogsecurity.com

had a look not on their, but did job since.

are their any other good sites like that?

http://techservices.audiovox.com/ but you need to register for free to get access. You can also look for fan car sites specific to you car make and or model.

thanks mate

Since yours is a Australia version the closest that I can cross is that it is simular to the ford taurus x. Here is the audiovox for the x, you will need to test to see if there is any cross of simular wire coding or not. Battery WHITE (+) IGNITION SWITCH HARNESS    Ignition 1 BLACK / YELLOW (+) IGNITION SWITCH HARNESS    Starter 1 BLACK/ WHITE (+) IGNITION SWITCH HARNESS    All Door Trigger BLACK/ WHITE (-) AT PASSENGER SIDE FUSEBOX    Domelight Super BLACK/ WHITE (-) AT PASSENGER SIDE FUSEBOX    LF Latch GREEN/ ORANGE (-) AT DRIVER SIDE FUSEBOX    RF Latch GREEN (-) AT PASSENGER SIDE FUSEBOX    Trunk Trigger BLUE/GREEN (-) DRIVER SIDE FUSEBOX MULTIPLEX CONTROL UNIT    Hood Trigger YELLOW (-) AT DRIVER SIDE FUSEBOX    Alarm Disarm ARMS WITH LOCKS    Alarm Arm DISARMS WITH UNLOCK    Parking Lights RED / BLACK (+) IN HARNESS IN PASSENGER KICKPANEL    Low Crr Pk Lights RED / YELLOW (-) LIGHT SWITCH HARNESS