the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hooking up 508d to viper 5904?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Artstar 
Member - Posts: 16
Member spacespace
Joined: August 14, 2002
Location: Australia
Posted: December 22, 2012 at 5:59 PM / IP Logged  
bospet40 wrote:
Can you just hook up the ground wire from the sensor to the gwa H1/6 of the 5804?
Absolutely. That's the internal modification I made. I cut and lifted the ground pin on the sensor connector and then soldered an internal wire from H1/6 to it. That'll keep the installation nice and neat.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer