02 explorer door trigger/dome light

Home / the12volt's Install Bay / Car Security and Convenience / 02 explorer door trigger/dome light (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

godsegoizhuge

Copper - Posts: 214

Joined: December 12, 2002

Location: United States

Posted: October 17, 2012 at 11:46 PM / IP Logged

Just installed a viper 5701 into the vehicle and everything seems to work fine except the dome light and puddle lights stay on for a few seconds and if I arm the alarm it beeps for the door ajar. Now I hooked up both the door trigger and dome light supervision to the BLACK/ light blue wire. Did I not do this part right?

Back to Top

flobee4

Silver - Posts: 585

Joined: January 02, 2004

Location: United States

Posted: October 17, 2012 at 11:58 PM / IP Logged

You did good, now to get rid of that chirp you need to go into the viper 5701's programming menus and turn off "Door trigger error chirp" Its in menu 2 feature 4. After you do that you'll be good to go.

Back to Top

godsegoizhuge

Copper - Posts: 214

Joined: December 12, 2002

Location: United States

Posted: October 17, 2012 at 11:59 PM / IP Logged

Can I access that option through the bit writer?

Back to Top

godsegoizhuge

Copper - Posts: 214

Joined: December 12, 2002

Location: United States

Posted: October 18, 2012 at 12:03 AM / IP Logged

I also noticed if I use the one way remote and hold the aux button down the rear hatch will pop, but if I try it with the two way remote it'd beep three times and do nothing. I thought it might be a weak battery thing so I bought them but forgot to see if it did it or not.

Back to Top

flobee4

Silver - Posts: 585

Joined: January 02, 2004

Location: United States

Posted: October 18, 2012 at 12:08 AM / IP Logged

Not sure about the remote function on the rear hatch release, but the bitwriter can definitely change that feature to off. just make sure at the end of programming, you set the remote selection to "0" then write.

Back to Top

vinchinzo

Copper - Posts: 66

Joined: October 11, 2012

Location: Kentucky, United States

Posted: October 23, 2012 at 12:36 PM / IP Logged

I had the same problem and fixed it with 8 diodes and 4 resistors

When in doubt....kick it!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 explorer door trigger/dome light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.