me design a lp variable cross

Home / the12volt's Install Bay / Car Audio / me design a lp variable cross (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

682146989723

Member - Posts: 9

Joined: June 09, 2012

Location: Michigan, United States

Posted: November 23, 2012 at 2:46 PM / IP Logged

DYohn wrote:

So use 2 crossovers.... no big mystery.

they need to be easily accessable and easily adjustable. as in 2 knobs protruding from the dash or console. the knobs do not need to be mounted too the board that handles all the cross over stuff if it is possible, just put 2 knobs on a small board and wire it too the larger. needs to be made. any builders on this forum?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

me design a lp variable cross

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.