adding pwr locks and rke: saturn sl1

Home / the12volt's Install Bay / Car Security and Convenience / adding pwr locks and rke: saturn sl1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 27, 2013 at 4:39 PM / IP Logged

Hey, nothing wrong with a cheap RKE system.

Have you checked the keyless module to see if you have any loose wires? Maybe a lousy ground or loose connections.

I put a cheap RKE into my company work van about three years ago and it gets used about 20/30 times a day. It was my first install of a RKE and I had all of those issues. Bad ground, loose connections, connections not weather proofed and corroded to the point of not working. Just my thoughts

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

caveeagle

Member - Posts: 5

Joined: January 22, 2013

Location: Illinois, United States

Posted: January 27, 2013 at 7:41 PM / IP Logged

Mike, the link does not work. Can you just post the ebay item #.

Also, are there actual relays built into this system? Or is it some type of solid state processor?

I assume I can wire in my factory switches if I want to ? I was planning to use all factory 2-wire actuators and would like the ability for passengers to hit the 'unlock' button from inside.

Also, does the system come with a wiring harness that extends to the doors?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 28, 2013 at 2:26 AM / IP Logged

Mike already stated it has built in relays.

How many terminals are there on your factory switches? Though as Mike said programmed for ign. lock/unlock you won't need them.

I already asked you how many terminals on your factory switches.

You will need twin core wiring to reach those motors.

Not attitude, thorough and stubborn. Two of those three questions have already been answered.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 29, 2013 at 6:49 AM / IP Logged

Yea, link is bad.The item number is in the link..... adding pwr locks and rke: saturn sl1 - Page 2 - Last Post -- posted image.

Mike M2

Tech Manager

CS Dealer Services

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding pwr locks and rke: saturn sl1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.