1998 nissan 1 tonner front room

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1998 nissan 1 tonner front room (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kieyaam

Member - Posts: 1

Joined: January 20, 2013

Location: South Africa

Posted: February 19, 2013 at 1:47 PM / IP Logged

Hi I have recently bought a nissan 1 tonner bakkie and the loom in front has been cut can anyone help me with a diagram on where these wires all lead to thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 19, 2013 at 5:37 PM / IP Logged

Only a workshop manual will help you there I'm afraid.

Have you tried colour to colour?

I would say you have no chance.

For example I recently installed some equipment in an 08 Nissan Navaro pick-up. (UK market, made in Spain).

This is the identical vehicle to the US Nissan Frontier but ignition loom wires apart, ALL the other wires are different colours.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1998 nissan 1 tonner front room

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.