the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

f 150 door pods


Post ReplyPost New Topic
< Prev Topic Next Topic >
9222tyler 
Member - Posts: 11
Member spacespace
Joined: June 21, 2012
Location: Alberta, Canada
Posted: February 24, 2013 at 1:26 PM / IP Logged  
This is the first pair of door pods I built for my brother in laws 05 F-150. Just thought I would throw some pictures up for you guys to see. This was the first set I have built so if anyone has got any advice to do it better then by all means throw your 2c in.f 150 door pods -- posted image.
I could not get photos to upload so here is a link.
Tyler
9222tyler 
Member - Posts: 11
Member spacespace
Joined: June 21, 2012
Location: Alberta, Canada
Posted: March 02, 2013 at 11:18 AM / IP Logged  
speakermakers 
Copper - Posts: 231
Copper spacespace
Joined: January 02, 2003
Location: United States
Posted: March 14, 2013 at 2:42 AM / IP Logged  
I like it. Really nice job on the amp wiring!
carbongoat 
Member - Posts: 1
Member spacespace
Joined: August 22, 2010
Location: Pennsylvania, United States
Posted: March 17, 2013 at 9:47 AM / IP Logged  
hey did you use any fiberglass mat on the pods? if not your gonna have some major problems with them shrinking and expanding in heat and cold.which will cause them the crack,warp.after the fleece you wanna do a layer of fiberglass mat. this will keep them stong and not let them shrink and expand.hope this helps you, other then that you did great.
9222tyler 
Member - Posts: 11
Member spacespace
Joined: June 21, 2012
Location: Alberta, Canada
Posted: March 25, 2013 at 10:42 AM / IP Logged  
I actually used fiberglass mat on the inside. I am not sure if that is the best way to do it, the reason i did it though was to make the finishing easier on the top because the grille cloth is reletively smooth. but yes i did put fiberglass mat on from the back.
Tyler
9222tyler 
Member - Posts: 11
Member spacespace
Joined: June 21, 2012
Location: Alberta, Canada
Posted: March 25, 2013 at 10:45 AM / IP Logged  
as for the amp, the box didnt quite turn out as good as i was hoping but it was alright, there is a matching silver cover over the amps i am still working on, and then we are putting this lift kit in the seat brackets. I belive its lmi welding that makes it. With that lift kit thing on the seat it has enough room for full size 10s so didnt have4 to use shallow subs
Tyler

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, January 23, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer