problems with an 09 audi a3

Went to look at an A3 Audi with a 5704, DB-ALL as D2D and 556U. Manual transmission. Installed by my new working partner about 3 months ago. The R/S, lock/unlock via the remote (although it turns on the alarm) and hatch release all suddenly not working. Today I changed the DB-All, still the same. Hood, door and 508d all work. Go into m/transm. reservation mode; flashes, remove the key and everything dies. Set it up for auto, hold down the clutch and ....nothing, not even the gauges. We know it's accepting parking brake and foot brake commands because if you ignore them the remote blows a raspberry Any thoughts and yes, could you would you dare to W2W one?.

We've done all the obvious tests and come to the conclusion it's either the alarm or there's a problem with the DB-ALL software, 2nd. DB-ALL by the way. We've also noticed that DEI withdrew the install instructions for all VW cars.

what year is the audi??how own your mind, control your life.

MECP certified. always use a DMM

09 =2009

in manual mode you have to do all the process to let the car in neutral, if you shift to auto, you skip the process, but you still have to bypass the clutch, audi and bmw are tricky to by pass the cluth, you have to make see it the wire voltage or resistence use a relay to bypass the clutch, most 5speed cars don;t start if they don;t see it the clutch input.how own your mind, control your life.

MECP certified. always use a DMM

also make sure the BLACK/ white neutral safety is ground it, also the togle switch, make sure is not getting a back feed on the brake wire brown, check hood inputhow own your mind, control your life.

MECP certified. always use a DMM

Sorry to offend but are trying to teach me to suck eggs? Read my first post, it all worked fine for three months.

Amateurs assume, don't test and have problems; pros test first. sorry i was just trying to help.how own your mind, control your life.

MECP certified. always use a DMM

Don't worry we've tied it down to a faulty 5704 ECU. If it initially works correctly, then you ain't done nothing wrong. Not for you dare but for some of the amateurs out there, if it doesn't initially work you HAVE done something wrong.