the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1990 Nissan 240sx Avital 3100 Video


Post ReplyPost New Topic
< Prev Topic Next Topic >
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: July 02, 2013 at 12:26 AM / IP Logged  
Made a video on putting in an Avital 3100 in my 1990 Nissan 240sx. Figured since I was putting it in I may as well make a little how to. Didn't do a hood pin or hatch trigger. I ran the wire to my kick panel so I may do them when I do my battery relocation. Didn't have a hood pin, or enough primary wire to run to the trunk light at the time. Got video and location of all of the wires though. Didn't do pictures. (Mods if this isn't the right place for this I apologize, please move if needed.)
I realized that I stumbled on some words and such. Keep in mind this wasn't as "stealth" install by any means. I really just was going for the keyless, and the security didn't cost much more.
Any feedback is appreciated.
Part 1 http://www.youtube.com/watch?v=7d-yB0bl4Ew   
Part 2 http://www.youtube.com/watch?v=SIC9K1ZJDPA
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
kreg357 
Platinum - Posts: 7,771
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: July 06, 2013 at 2:00 PM / IP Logged  
Excellent job! 1990 Nissan 240sx Avital 3100 Video -- posted image.   Great videos with many good installation tips.
I especially liked / noted the one on electric tape covering the metal
tabs on the ATC fuses. Think many of us have found that out the hard
way! Sure miss the old fuse holders with the flip-cap covers.
Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, February 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer