2010 accord v6 sedan wiring info

Hi guys

I was unable to find the wiring info for the 2010 accord. Im prepairing for the installation of the alarm, remote start and window modules.

I may have missed it somewhere here but thanks for any direction. 

For vehicle wiring, here are some sources : Here is a link to Bulldog Security : http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp Here is a link to Ready Remote : http://www.readyremote.com/main.asp Here is a link to AudioVox : http://techservices.audiovox.com/AccessRequest.aspx    Sign-up & info is free. Soldering is fun!

Thanks for the links. I looked at each but still couldnt find wiring for a 2010 accord. Seems they have the years before and after but not 2010.

Not sure if these links will work : http://www.readyremote.com/print.asp?action=select&yr=25092&product=Remote Start http://diagrams.marktoonen.nl/printlist.aspx?MakeID=3&ModelID=20116Soldering is fun!

12 VOLT CONSTANT WHITE (+) @ IGNITION SWITCH, (WHITE, 5-Pin Plug) Pin 2 STARTER YELLOW (+) @ IGNITION SWITCH, (WHITE, 5-Pin Plug) Pin 1 STARTER 2 N/A IGNITION 1 BLUE (+) @ IGNITION SWITCH, (WHITE, 5-Pin Plug) Pin 5 IGNITION 2 N/A IGNITION 3 N/A ACCESSORY /HEATER BLOWER 1 ORANGE (+) @ IGNITION SWITCH, (WHITE, 5-Pin Plug) Pin 3 ACCESSORY /HEATER BLOWER 2 RED(+) @ IGNITION SWITCH, (WHITE, 5-Pin Plug) Pin 4 KEYSENSE N/A PARKING LIGHTS ( - ) GRAY (-) @ HEADLIGHT SWITCH, (BLACK/ WHITE, 12-Pin Plug) Pin 11 PARKING LIGHTS ( + ) RED (+) (Left Front and Left Rear) Note #2 @ DRIVERS DASH FUSE BOX, (LT. GREEN, 16-Pin Plug) Pin 11 POWER LOCK ORANGE (-) TYPE B, SEE NOTE #3 @ POWER WINDOW MASTER SWITCH,(GRAY, 37-Pin Plug) Pin 28 POWER UNLOCK BROWN & WHITE (-) TYPE B, SEE NOTE #3 AND #4 @ POWER WINDOW MASTER SWITCH, (GRAY, 37-Pin Plug) Pins 29 and 31 LOCK MOTOR WIRE ORANGE (5-wire type) SEE NOTE #5 DOOR TRIGGER BROWN (-) @ DRIVERS DASH FUSE BOX, (LT.GREEN 16-Pin Plug) Pin 12 DOMELIGHT SUPERVISION PINK (-) Below DRIVERS DASH FUSE BOX, (WHITE, 4-Pin Plu) Pin 2 or WHITE 20-Pin Plug, Pin 12 TRUNK RELEASE USE TRUNK RELEASE MOTOR WIRE SLIDING POWER DOOR N/A HORN ORANGE or GREEN/ YELLOW (-) @ HORN SWITCH or DRIVERS DASH FUSE BOX, (LT.GREEN 33-Pin Plug) Pin 23 TACH ANY WIRE NOT YELLOW/BLACK (INLINE 4), YELLOW (V6) (AC) @ Any FUEL-INJECTOR WAIT TO START LIGHT N/A BRAKE LT. GREEN (+) @ BRAKE SWITCH or DRIVERS DASH FUSE BOX, (LT.GREEN 33-Pin Plug) Pin 2 FACTORY ALARM DISARM SEE POWER UNLOCK ANTI-THEFT HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module, See NOTE #1 @ IGNITION SWITCH TUMBLER NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module: (For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation. (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. (For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation) 1-KEY Required for Programming. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: the RIGHT FRONT wire is GRAY (+) @ the PASSENGER KICK FUSE BOX, (LT. GREEN, 16-Pin Plug) Pin 11 NOTE #3: TEST these wires while turning the Key in the Drivers Door. NOTE #4: the BROWN (-) is the DOOR Key Cylinder UNLOCK wire and WHITE(-) is the DOOR UNLOCK Detection wire. Use BOTH wires and Diode Isolate. Program module for Double Pulse Unlock NOTE #5: on the 2-DOOR, this wire is located in the Drivers Kick Panel. On the 4-DOOR, this wire is located @ DRIVERS DASH FUSE BOX, (GREEN 16-Pin Plug) Pin 9

Thanks man. I really appreciate. I'm doing all my pre install research now. I'm figuring out what I'll need to do with the anti theft system before installing the 5706x

Thanks man. I really appreciate. I'm doing all my pre install research now. I'm figuring out what I'll need to do with the anti theft system before installing the 5706x