1998 f150 factory alarm rearm with rs fob

Home / the12volt's Install Bay / Car Security and Convenience / 1998 f150 factory alarm rearm with rs fob (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

alstaregixxer

Member - Posts: 16

Joined: April 17, 2004

Location: Canada

Posted: November 21, 2013 at 12:21 PM / IP Logged

Installed a remote start with keyless entry in a '98 f150 w/factory keyless entry, customer would like the factory alarm to arm with remote start fob just as it did with factory fob. Am I missing something obvious here? None of the wiring schematics I have found list a factory arm, only disarm. Remote start has re-arm wire in harness.

Thanks.

Hey, is this supposed to spark like that?

Back to Top

alstaregixxer

Member - Posts: 16

Joined: April 17, 2004

Location: Canada

Posted: November 21, 2013 at 1:03 PM / IP Logged

Figured it out, on this truck there are 2 blue/white wires going into the same plug as the disarm wire, it was the one that rests at ground.

Hey, is this supposed to spark like that?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1998 f150 factory alarm rearm with rs fob

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.