flashlogic and starter

Home / the12volt's Install Bay / Car Security and Convenience / flashlogic and starter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

oldsmobile94

Copper - Posts: 51

Joined: March 14, 2007

Location: New York, United States

Posted: November 23, 2013 at 6:42 AM / IP Logged

hey not sure what wires or wires to hook up to my flashlogic bypass from my hornet 564t alarm and starter. the flashlogic unit says hook up the starter wire to it but the alarm an start unit has 2 a keyside and a motorside not sure which 1 to connect or should I connect them both?

tk

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 23, 2013 at 6:48 AM / IP Logged

Could use some more info. What Year, Make and Model of vehicle? What firmware is flashed on to the FLCAN?

Typically, if the bypass needs to see a (+) Starter input, you would use the "motor" side ( Purple wire ) from the R/S.

Soldering is fun!

Back to Top

oldsmobile94

Copper - Posts: 51

Joined: March 14, 2007

Location: New York, United States

Posted: November 23, 2013 at 9:02 PM / IP Logged

the vehicle is a 2009 jeep liberty, the firmware on the bypass is FLC-AD(DL)-ch5. guide # 10762.

tk

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

flashlogic and starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.