2011 camaro alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2011 camaro alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: December 21, 2013 at 9:26 PM / IP Logged

Also when you see a big black DOT where two wires meet , it means that they must be connected together (it's obvious ) but I thought I'd mention it anyway .

triniforever

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: December 22, 2013 at 11:35 AM / IP Logged

That 1 i knew and again thanks im going to dive in today

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: December 22, 2013 at 6:29 PM / IP Logged

im not going to keep the dball after days of research going with idata so i may have a new ? soon lol thanks all

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: January 06, 2014 at 4:07 PM / IP Logged

How do you know if you need relays

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: January 07, 2014 at 8:18 AM / IP Logged

My alarm sheet says connect wire a to starter wire of car well my tech car sheet says starter 2 and ignition wire are same so do i just run all 3 together. I have a week to complete before i call it quits so any help is much appreciated

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: January 07, 2014 at 9:02 AM / IP Logged

itsmars wrote:

forgot to add this 2011 camaro Battery RED / WHITE (+) IGNITION SWITCH

Ignition 1 PINK (+) IGNITION SWITCH

Accessory 1 PINK (+) IGNITION SWITCH HARNESS

Accessory 2 BROWN (+) IGNITION SWITCH HARNESS

Starter 2 PINK (+) IGNITION SWITCH HARNESS

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: January 07, 2014 at 9:06 AM / IP Logged

itsmars wrote:

forgot to add this 2011 camaro Battery RED / WHITE (+) IGNITION SWITCH

Ignition 1 PINK (+) IGNITION SWITCH

Accessory 1 PINK (+) IGNITION SWITCH HARNESS

Accessory 2 BROWN (+) IGNITION SWITCH HARNESS

Starter 2 PINK (+) IGNITION SWITCH HARNESS

THROUGH A 9.6K OHM RESISTOR this was the speacial note with starter 2

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: January 07, 2014 at 2:24 PM / IP Logged

Can i get any help???

bl4ck3d0ut

Member - Posts: 27

Joined: November 14, 2013

Location: Alaska, United States

Posted: January 07, 2014 at 2:33 PM / IP Logged

You dont need to hookup the starter wire at all if you going D2D

itsmars

Member - Posts: 23

Joined: December 19, 2013

Location: California, United States

Posted: January 07, 2014 at 4:45 PM / IP Logged

bl4ck3d0ut wrote:

You dont need to hookup the starter wire at all if you going D2D

Im going straight w2w though

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.