dvc+svc

Home / the12volt's Install Bay / Car Audio / dvc+svc (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

04nata

Copper - Posts: 358

Joined: April 22, 2008

Posted: December 29, 2013 at 6:33 PM / IP Logged

If I have 2 subs that are dual 4ohm voice coils and 1 sub that is a single 4ohm voice coil, will it work out if I run the DVC4's in series to get 8 from each and then parallel with the SVC 4 to get a 2 ohm load?

4+4=8 s

8+8+4=2 p

will I get even power to each sub?

2004 Hyundai Sonata

Kenwood KDC-X599 HU

2-Sundown X-18D4

2-SQ Q4500.1

2-SQ Q90.4

1-Massive DBX4

8-Niche 5.25 mids

8-Niche Tweeters

4-Skar 8" mid-bass

OhioGen 220a alt

OhioGen 350a alt

156.0

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 29, 2013 at 7:52 PM / IP Logged

The single 4 ohm driver will get 50% of the amplifiers power, and the dual 4s will split the other half of the power between them. So they will each get 25% of the amps power.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dvc+svc

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.