folding mirror controller for honda

I'd try to find a 530T. Then as shown in the downloads section, there is a modification for motors that draw higher current. I don't see why the values of the resistors that are changed could be changed in the opposite direction/value. Make the unit more sensitive to lower current motors. Just a thought. Mark

triniforever wrote: Google "folding mirror controller " and there is an actual controller on ebay for abt $35 dollars and it seems very impressive .

I cannot see the one you mention. I have the factory switch that is meant for this car installed already on the driver's door arm rest. The factory switch is basically a DPST, three lead. I did a lot of thought on this and I think I can put this together myself using two DPDT relays, and two DEI 528T to time the motor activation. You think this might work? The only other thing that might be handy is to rig it so that when the car starts, the mirrors will automatically unfold.

triniforever wrote: Google "folding mirror controller " and there is an actual controller on ebay for abt $35 dollars and it seems very impressive .

I think I found that mirror controller. Looks like it is more for tying into an existing system and to auto fold/entend the mirror when the dorr open. Does not appear to be what I need but that wiring diagram is kind of out of focus. I will order one and it might be useful addition to auto fold and extend the mirrors as an alternative to manually operating the (factory) switch.

triniforever wrote: Google "folding mirror controller " and there is an actual controller on ebay for abt $35 dollars and it seems very impressive .

Just got a reply from China. That controller is designed to signal the mirror controller built into the car to enable the mirrors to be activated on ignition start, door lock/unlock, etc. It is NOT a mirror controller. Looks like I try my home brewed mirror controller.