remote start on 78 nova

Home / the12volt's Install Bay / Car Security and Convenience / remote start on 78 nova (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: February 28, 2014 at 8:35 PM / IP Logged

so you need the wiring for the turn signal/hazard switch on the column?

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: February 28, 2014 at 8:39 PM / IP Logged

The book has that .I don't plan on using those all. The car is all manual so I'm use just the remote start and the trunk release I'm use to trigger my solenoid I wired to my carb for the remote start. This install is gonna be basic I just dont want to mess with the old wiring too much. As for door triggers I'm tap into those tho

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: February 28, 2014 at 8:48 PM / IP Logged

http://www.stevesnovasite.com/images/electrical/77_78_NovaWire.pdf

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: February 28, 2014 at 8:49 PM / IP Logged

Yea that's the one I have i found online

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: February 28, 2014 at 9:10 PM / IP Logged

well if you need more help, just ask.

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: February 28, 2014 at 9:15 PM / IP Logged

Ok thanks i ill oost if I run into a pot hole

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: March 01, 2014 at 4:24 PM / IP Logged

Ok I'm on the trunk release and the wiring legend says neg but on most trunk release its positive .also on the tach the wiring diagram link about it says its brown am I correct

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 01, 2014 at 5:35 PM / IP Logged

You'll need a relay to convert the negative low current output to a positive high current one. Is the coil integral to the distributor cap or external? If internal, the cap may be label with TACH. There would be a male terminal on the cap. If external coil, use the (-) terminal.

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: March 01, 2014 at 5:41 PM / IP Logged

Its labeled tach but no wire coming out on that end. Also the siren the wiring legend has a neg but the siren itself has a postive and neg the neg wire looks like it supposed to be grounded it has a o ring connector

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 01, 2014 at 5:54 PM / IP Logged

Use a mirror or feel if there is a terminal on the cap. On the siren, I thought DEI used positive siren outputs. Connect brown to red, ground the black, see if siren sounds.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.