the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Fiberglass Tower Build for Boat


Post ReplyPost New Topic
< Prev Topic Next Topic >
david.brady 
Member - Posts: 1
Member spacespace
Joined: March 12, 2014
Location: Texas, United States
Posted: March 12, 2014 at 11:44 AM / IP Logged Link to Post Post Reply Quote david.brady

I am going to be building a tower enclosure for a buddy of mine that will use 4 x 6.5" Coax apeakers. He now wants to add an 8" sub in the middle that will look like this:

Fiberglass Tower Build for Boat - Last Post -- posted image.

Once he purchases the sub I will build the sub enclosure first, according to the volume specs of the sub, then incorporate it into the rest of the build. It will be powered by an amp that is run off a seperate battery and I plan on running the 6.5"s off of the deck.

My question is should the sub be ported or sealed? I have built many fiberlgass enclosures in the past, but all for car-audio applications, never in an "open cabin" environment. He doesnt listen to rap or hip-hip, mostly old school rock so he isnt looking to host a cove party, just rock some oldies with a good hit. What type of enclosure will I need to get the most response from a single 8" sub?  If I port it, it will likely be a single cylinder that fires down using 2-3 in pvc.

Any suggestions? Thanks in advance!

"In order to succeed, your desire for success should be greater than your fear of failure." -Bill Cosby

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer