second movement sensor

Home / the12volt's Install Bay / Car Security and Convenience / second movement sensor (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mr signal

Member - Posts: 34

Joined: April 29, 2014

Location: South Africa

Posted: June 19, 2014 at 12:12 AM / IP Logged

Can a second movement sensor be add on to the existing aftermarket alarm system.one for the dash and one for the back of the truck.can it be done or would it put too much pressure on the module?would it rather be safer to move the sensor to the back and let the 2door switches operate in front.thanks in advance

Mr signal

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 19, 2014 at 6:07 AM / IP Logged

Depends on the alarm, some have provision for extra sensors, otherwise as you suggest.

Back to Top

mr signal

Member - Posts: 34

Joined: April 29, 2014

Location: South Africa

Posted: June 19, 2014 at 6:13 AM / IP Logged

Ok This module only has a ouput for one sensor.thank you Mr Howie better safe then sorry

Mr signal

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

second movement sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.