back again having problems with my viper

Home / the12volt's Install Bay / Car Security and Convenience / back again having problems with my viper (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page Next Page > < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 30, 2014 at 4:58 PM / IP Logged

Yes, that's exactly what I meant.

Back to Top

bbourque940

Member - Posts: 40

Joined: October 26, 2013

Location: Florida, United States

Posted: June 30, 2014 at 5:05 PM / IP Logged

I did test the green h3 & violet h3. They checked out Ok. I also checked continuity between the yellow starter wire, at the IGN switch & the yellow wire to the starter. . And there was continuity all way thru the viper. So I'm sure now that the problem lies at the ignition switch. Or the starter wire out of the switch?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 30, 2014 at 5:09 PM / IP Logged

So check for 12 volts at green and violet on regular start.

Back to Top

bbourque940

Member - Posts: 40

Joined: October 26, 2013

Location: Florida, United States

Posted: June 30, 2014 at 5:12 PM / IP Logged

Yes I did this sorry, I should have mentioned it. I get intermittent power at the h3 green & violet.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 30, 2014 at 5:16 PM / IP Logged

Intermittent?? Meaning 12V+ for4 about 1 second, goes off when you release the key back to ignition?

Back to Top

bbourque940

Member - Posts: 40

Joined: October 26, 2013

Location: Florida, United States

Posted: June 30, 2014 at 5:17 PM / IP Logged

If I jiggle the key in the start position. The h3 green & violet will get power & crank (intermittently)

Back to Top

bbourque940

Member - Posts: 40

Joined: October 26, 2013

Location: Florida, United States

Posted: June 30, 2014 at 5:20 PM / IP Logged

Sorry I'm at a loss for words lol back again having problems with my viper - Page 2 -- posted image.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 30, 2014 at 5:20 PM / IP Logged

Think you just found the answer, simple get out, use the R/S to start and then key and footbrake take-over.

Back to Top

bbourque940

Member - Posts: 40

Joined: October 26, 2013

Location: Florida, United States

Posted: June 30, 2014 at 5:25 PM / IP Logged

Sometimes when the key is turned to the start/crank position the h3 wires receive 12v..

Other times turning the key to the start/crank position will not provide 12v to the h3.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 30, 2014 at 5:27 PM / IP Logged

Either what I said in my last post or a new ignition switch.

Back to Top

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.