spacer spacer spacer spacer

o2 sensor wiring to ecu

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: July 12, 2014
Location: Colorado, United States
Posted: July 12, 2014 at 2:31 AM / IP Logged  
I have a 1992 Pontiac grand prix. the o2 sensor is not hooked up. I put a new one in but the connection to the pcm is no where to be found. I need it to be connected to pass emitions. where do I go to find the connection at?
figuring it out
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: July 14, 2014 at 7:09 AM / IP Logged  
You mean that there is no single wire connection off then standard harness?
Not that I'm Pontiac familiar, but from what I've seen there are various versions - all EFI but some with two sensors - and all (from memory) single wire. If it's the st'd loom, there should be a termination for the O2 sensor.
Is the loom st'd or has it been butchered?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Saturday, June 12, 2021 • Copyright © 1999-2021, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer