ford ranger bypass clutch RS

Home / the12volt's Install Bay / Car Security and Convenience / ford ranger bypass clutch RS (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Duston

Member - Posts: 42

Joined: March 08, 2003

Location: Iowa, United States

Posted: May 19, 2003 at 1:34 PM / IP Logged

Hello everybody, any help here with a 98 ford ranger 5 speed? I have put a remote start on a few cars with a postive type clutch but no cars with a negitive type. theres about 5 wires at the top of the clutch switch, and my alarm don't have a neg output when running. please post if you have any help. thanks

Factory security systems suck!

Back to Top

nighthawk2k

Copper - Posts: 116

Joined: June 02, 2003

Location: United States

Posted: July 04, 2003 at 9:01 AM / IP Logged

You need to use a relay to change the polarity of the positive output

Tommy

-Clifford/Directed/Alpine-Audio & Security-

New York Installer ford ranger bypass clutch RS -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ford ranger bypass clutch RS

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.