the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2014 lexus i250


Post ReplyPost New Topic
< Prev Topic Next Topic >
mustyk@att.net 
Copper - Posts: 132
Copper spacespace
Joined: November 25, 2009
Location: Michigan, United States
Posted: November 14, 2014 at 7:21 AM / IP Logged  
I am looking for a bypass solution for a 2014 Lexus I250. I tried the ADS version of Omega MDB-ALL with TL-7 firmware and despite their claims IT DOES NOT WORK. Does anybody have a solution that has been tried and true that DOES work?
thetopinstaller
tonanzith 
Gold - Posts: 593
Gold spaceThis member consistently provides reliable informationspace
Joined: July 18, 2008
Location: Washington, United States
Posted: November 14, 2014 at 2:54 PM / IP Logged  
If you mean the IS 250 push to start I have used the ads al ca and also the fortin EVO all on these and they have worked just fine.
Gary Sather
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 14, 2014 at 5:00 PM / IP Logged  
Used DB-ALL2 with Python here in the UK on a 2014 LS 600, worked well.
All the equipment was purchased in the US, I didn't need to re-flash the DB, just that everything on the Xpresskit page was the other side of the car.
mustyk@att.net 
Copper - Posts: 132
Copper spacespace
Joined: November 25, 2009
Location: Michigan, United States
Posted: November 20, 2014 at 7:45 AM / IP Logged  
is the LS600 Equivalent to the U.S. made IS250? If so What firmware did you use?
thetopinstaller
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 20, 2014 at 7:48 AM / IP Logged  
No completely different model, it's the large saloon, I was just pointing out that US bought equipment including flashing in the US worked well on a Euro Spec. vehicle thus DB-ALL 2 should give you no problems.
mustyk@att.net 
Copper - Posts: 132
Copper spacespace
Joined: November 25, 2009
Location: Michigan, United States
Posted: November 20, 2014 at 7:49 AM / IP Logged  
Well, gave up on the ADS piece. Would not work, but had better success with the EVO-ALL
thetopinstaller

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer