the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2013 nissan sentra, non smart key or pts


Post ReplyPost New Topic
< Prev Topic Next Topic >
jgarcia1925 
Copper - Posts: 57
Copper spacespace
Joined: November 10, 2014
Location: Illinois, United States
Posted: December 12, 2014 at 2:58 PM / IP Logged  
hello, ill be using a CA6554 with flashlogic FLCAN for immobilizer
i have seen on a few other sites that some people have been having issues with the 2013 sentra throwing CEL on. has anyone had this issue?
i see that this car does not have second start, only 2nd acc... now, has anyone on here had this issue with any remote starts? if so what can i do to get around it?
chev104275 
Gold - Posts: 1,401
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 12, 2014 at 6:05 PM / IP Logged  
Could be a timing issue making sure the connections are setup correctly (ing as ing and acc as acc)
12 VOLT CONSTANT      GREEN (+)      @ IGNITION SWITCH, WHITE 6-PIN PLUG, PIN 3     
STARTER      BLUE (+)    @ IGNITION SWITCH, WHITE 6-PIN PLUG, PIN 2
IGNITION 1      RED (+)      @ IGNITION SWITCH, WHITE 6-PIN PLUG, PIN 1     
     
ACCESSORY /HEATER BLOWER 1      PINK (+)      @ IGNITION SWITCH, WHITE 6-PIN PLUG, PIN 4
     
ACCESSORY /HEATER BLOWER 2      WHITE (+)      @ IGNITION SWITCH, WHITE 6-PIN PLUG, PIN 5
If i Can't Install it    I Don't need it   Joe
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 12, 2014 at 11:34 PM / IP Logged  
isolate your start wire with a diode inline
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
jgarcia1925 
Copper - Posts: 57
Copper spacespace
Joined: November 10, 2014
Location: Illinois, United States
Posted: December 13, 2014 at 9:38 AM / IP Logged  
tedmond wrote:
isolate your start wire with a diode inline
Some people have said that. Do you think a 3 amp will be suffice? Or do I need anything more than that?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 13, 2014 at 9:01 PM / IP Logged  
i would use 6amp to be safe
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
jgarcia1925 
Copper - Posts: 57
Copper spacespace
Joined: November 10, 2014
Location: Illinois, United States
Posted: December 13, 2014 at 9:24 PM / IP Logged  
Cool. All I have is 3amp. Might have to run somewhere to get one then thanks
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 13, 2014 at 11:44 PM / IP Logged  
doesnt hurt to use 3 amp to see if that helps rid of the CEL issue. if the issue is resolved go purchase 6amps
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: December 14, 2014 at 9:11 AM / IP Logged  
I would just put two of the 3-amps in parallel.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, December 1, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer