the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Directed 5x10 Programing


Post ReplyPost New Topic
< Prev Topic Next Topic >
lg73 
Member - Posts: 3
Member spacespace
Joined: September 28, 2014
Location: British Columbia, Canada
Posted: January 22, 2015 at 10:03 PM / IP Logged Link to Post Post Reply Quote lg73
Does anyone have a manual or a file that list all of the programing options for this module? I would like to pick the options before I have to hunt for each one and then flash it.
Lyleg73
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 23, 2015 at 5:54 PM / IP Logged Link to Post Post Reply Quote tedmond
programming options are dependant on the flash you use on the vehicle.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
lg73 
Member - Posts: 3
Member spacespace
Joined: September 28, 2014
Location: British Columbia, Canada
Posted: January 23, 2015 at 6:05 PM / IP Logged Link to Post Post Reply Quote lg73
ford 6, or do you need the 800.ford6.v219.284D?
Lyleg73
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 23, 2015 at 6:47 PM / IP Logged Link to Post Post Reply Quote tedmond
use the flash that's recommended when you select the vehicle under xpressvip.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
lg73 
Member - Posts: 3
Member spacespace
Joined: September 28, 2014
Location: British Columbia, Canada
Posted: January 23, 2015 at 8:09 PM / IP Logged Link to Post Post Reply Quote lg73
I can do these with no problem. Want to change output timing and alarm functions and would like to know the options available.
What I want is a list of the flash options so I can make up a program sheet before I log in and flash the module. On the web site you come to "login to see flash options".
Lyleg73
team128 
Member - Posts: 7
Member spacespace
Joined: February 12, 2015
Location: California, United States
Posted: March 23, 2015 at 2:02 PM / IP Logged Link to Post Post Reply Quote team128
lg73 -- did you get a response to your question. I have XpressVIP 4.5 and XKloader2 installed and operational but my 5X10 doesn't have any firmware loaded (I need 800.DEI v2.90 90.290d firmware which is Analog for Python, not vehicle specific). What was your solution? Thanks.
2001 ITR 01-0424 was stolen < 4 weeks
selling 1991 Integra LS because it will be stolen
replaced by 1996 Honda Pacific Coast
surfbark 
Member - Posts: 1
Member spacespace
Joined: December 28, 2008
Location: California, United States
Posted: June 14, 2015 at 8:39 PM / IP Logged Link to Post Post Reply Quote surfbark
Did anyone have any luck sourcing 800.Ford6 2.15.284d? That's what I had and everything worked
I regrettably overwrote it in a moment of confusion and managed to lose all functionality of everything (remote start, alarm, remote pairing)
Tech support said Ford 6 is all the same but my system is wrecked. Doesn't seem like DEI wants to support my particular vehicle anymore. ( 2010 f350 )
peterletran 
Member - Posts: 3
Member spacespace
Joined: October 21, 2015
Location: Pennsylvania, United States
Posted: October 21, 2015 at 2:09 AM / IP Logged Link to Post Post Reply Quote peterletran
Main Module Configuration
SECURITY SYSTEM FEATURES
System Arming Mode:
1. Active: the transmitter must be used to arm the Starter kill.
2. Passive Arm w/o lock: After exiting the vehicle the system will automatically arm the starter kill and the doors will NOT lock.
3. Passive Arm w/lock: After exiting the vehicle the system will automatically arm the starter kill and lock the doors.
4. Auto re-arm w/o lock: If the vehicle is not entered after receiving an unlock command, the system will automatically rearm the starter kill and the doors will NOT lock.
5. Auto re-arm w/lock: If the vehicle is not entered after receiving an unlock command, the system will automatically rearm the starter kill and lock the doors.
Panic Mode:
1. On: panic output can be activated at any time.
2. Ign Off Only: output can be activated only when the ignition is off.
3. Off: output is disabled.
Confirmation Chirps:
This feature controls the horn honks when locking and unlocking the system.
Horn Function
1. Panic Only: The horn will only sound when the panic mode is activated.
2. Lock/unlock Function 20/30/40/50ms: Will pulse the horn output with lock and unlock for the predefined output timing.
Override Pulse Count
1-5: sets the number of times the Control button should be pressed (1-5) to override the starter kill system. *The default value is 1.
Sensor Icon Type
Trigger/Panic Duration (seconds)
One-time Bypass
1. Off: feature NOT available.
2. On: this feature will disable Passive Arming once and, if armed by remote control it will disable the Comfort Closure and Aux outputs linked to arming.
NPC – Nuisance Prevention Circuitry
NPC stops repeated triggering of the same zone. If one zone is triggered three times in one hour, that zone is bypassed for one hour, starting from the time of the third trigger. During that hour, if the system sees a trigger on that zone again, the system resets the one hour timer.
Door Trigger Error Chirp
1. On: if the door trigger is active when arming, the siren will emit a chirp and a message will be sent to the 2-way remote control as an alert.
2. Off: an active door trigger when arming will NOT create an alert output.
REMOTE START FEATURES
Engine Checking Mode
1. Virtual Tach: battery voltage drop/rise during cranking determines when the starter output is released. During runtime, constant voltage level is monitored to determine if the engine is running.
2. Voltage: starter output during cranking is a programmed duration (Set in Cranking Time). During runtime, constant voltage level is monitored to determine if the engine is running.
3. Off: starter output during cranking is a programmed duration (Set in Cranking Time). The remote starter will keep the ignition/accessories active for the programmed runtime whether the engine is running or not.
4. Tachometer: tachometer input signal during cranking and runtime to determine when the starter output is released and if the engine is running.
Cranking Time (seconds)
If the unit is programmed for no engine checking or voltage sense, the crank time must be set to the appropriate duration. The default setting is 0.6 seconds.
Activation Pulse County
1-3 pulses: sets the number of remote control commands received or Activation Input required to enable and disable remote start. The default value is 1.
Diesel Delay Type/Duration
Accessory Output during Diesel Start Delay
1. On: Accessory output will be ON during diesel-start delay.
2. Off: output will be OFF during diesel-start delay.
Turbo Mode Runtime
1. 0 – No turbo Mode: turbo mode is NOT available.
2. 1 to 10 minutes – On: turbo mode is available and, when activated, the engine will run for the duration set according to the selected option.
Remote Start Runtime (minutes)
1 to 60 minutes: sets engine runtime during normal remote start operations. The default value is 12 minutes.
Smart Start/Timer Mode Runtime (minutes)
Sets the duration of runtime when the engine is started by the Timer Mode and Smart Start features
Smart Start/Timer Mode Start Count
Sets the number of times the engine will be started by the Timer Mode and Smart Start features
Timer Mode Start Interval (Hours)
1/2/3/4 to 24 in 2 hour increments: sets the number of hours between engine starts by the Timer Mode and Smart Start features. The default value is 3 hours.
Smart Start High Temperature Threshold
Smart Start Low Temperature Threshold
Smart Start Low Battery Threshold (Volts)
OFF, 9V to 12.5V in 0.5V increments: sets the low battery level threshold required for SmartStart to turn the engine on. The default value is 10.5V.
Virtual Tach Fine Tune (Milliseconds)
Remote Start Safe Lock
SYSTEM FEATURES
Ignition Controlled Locks
1. No Ign-locking: door lock/unlock outputs will NOT be activated when ignition is turned on/off.
2. Lock & Unlock: lock/unlock outputs will be activated when ignition is turned on/off.
3. Lock Only: lock output will be activated when ignition is turned on.
4. Unlock Only: unlock output will be activated when ignition is turned off.
DoorLock Pulses
2nd Unlock
Provides a pulse on 2nd Unlock press from remote (useful for progressive locks).
Comfort Closure
1. No Comfort Closure: Comfort Closure is deactivated when arming.
2. Comfort Closure 1: door lock pulse (or 2nd pulse for double pulses) will remain on for 20 seconds.
3. Comfort Closure 2: 800mS following the end of the door lock pulse (or 2nd pulse for double pulses); the door lock output will turn on again for 20 seconds.
Hood Trigger Type
Normally open or normally closed
Ignition Controlled Domelight
1. On: dome light output will be activated when the ignition is turned off. It will be activated for 30 seconds, until the alarm is armed or until the ignition is turned on.
2. Off: dome light output will NOT be activated when the ignition is turned off.
OEM Alarm Disarm w/Aux-Trunk
1. On: OEM Alarm Disarm wire will pulse as programmed when the Aux/Trunk output is activated.
2. Off: OEM Alarm Disarm wire will NOT pulse when the Aux/Trunk output is activated.
OEM Alarm Disarm Output
1. With Unlock: OEM Alarm Disarm wire will pulse as programmed concurrently with unlock wire.
2. Before Unlock: OEM Alarm Disarm wire will pulse as programmed before the unlock wire.
3. Remote start only: OEM Alarm Disarm wire will pulse as programmed during remote start only.
OEM Alarm Disarm Pulses
1. OEM Alarm Disarm wire will pulse once per operation.
2. OEM Alarm Disarm wire will pulse twice per operation.
Aux/Trunk Output type
Aux/Trunk Icon
Remote keypad unlocking
A message telling the remote control to unlock the keypad is sent each time the vehicle ignition is turned off
Transmitter Programming
Locks/unlocks the user’s ability to enter the HHU/Reset menu and manually change any functions using the Control Center. The default value is Unlock.
SENSE CONFIGURATION
Sense doors status AutoWireData
Sense ignition status AutoWireData
Sense hood status AutoWireData
Sense trunk status AutoWireData
Sense handbrake status AutoWireData
Sense tacho status AutoWireData
Sense brake status AutoWireData
Sense glowplug status AutoWireData
Sense oem lock DisableEnable
Sense oem unlock DisableEnable
Sense oem trunk DisableEnable
DATA FEATURE CONFIGURATION
Smart OEM Alarm Control
peterletran 
Member - Posts: 3
Member spacespace
Joined: October 21, 2015
Location: Pennsylvania, United States
Posted: October 21, 2015 at 2:11 AM / IP Logged Link to Post Post Reply Quote peterletran
Directed 5x10 Programing - Last Post -- posted image.
Directed 5x10 Programing - Last Post -- posted image.
team128 
Member - Posts: 7
Member spacespace
Joined: February 12, 2015
Location: California, United States
Posted: January 12, 2016 at 7:06 PM / IP Logged Link to Post Post Reply Quote team128
Thanks for providing information on programmer options especially for remote. However I still need to load the firmware into the 5X10. Apparently I bought it from an unapproved company (didn't know about such things). I'm going to take it to a local installer and see if they will load firmware for a fee. Otherwise I'll buy another 5X10 from an approved company like Crutchfield.
2001 ITR 01-0424 was stolen < 4 weeks
selling 1991 Integra LS because it will be stolen
replaced by 1996 Honda Pacific Coast

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer