acura tsx 04 automatic

Home / the12volt's Install Bay / Car Security and Convenience / acura tsx 04 automatic

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 07, 2015 at 11:11 PM / IP Logged

its positive trunk release. Should have used an idatalink ads-alca or fortin evo all. If you didn't run wires into the doors for arm/disarm; good luck starting the car without the factory alarm going off.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

ttttiiinna

Member - Posts: 8

Joined: January 07, 2013

Location: Texas, United States

Posted: March 15, 2015 at 5:11 PM / IP Logged

Hey everyone,

I finally went back and installed the factory disarm wire. It seems to work completely fine however, I'm running into to an issue where my 2 way remote picks up the signal that my door is open when I hit the unlock button. All the doors are close and the wires are connected correctly... My work around is to put the key in and turn the ignition once. After I do that... My two way remote does not see the doors are open when I punch unlock.

However, if the alarm were to go off, I would hit lock or unlock to turn the siren offs... I would have the same issue where the 2 way remote gets the open door signal when I unlock and I would have to put the key in to clear it.

The lock/arm works completely fine with no issues. I've also check to see if the door trigger wires are correct and there's no problem there.

Thanks!

Back to Top

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 15, 2015 at 8:08 PM / IP Logged

its picking up the domelight on the door triggers. In programming look for menu 2, item 4 option 2

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

ttttiiinna

Member - Posts: 8

Joined: January 07, 2013

Location: Texas, United States

Posted: March 15, 2015 at 8:17 PM / IP Logged

Hey Ted!

Thanks for the reply.... For confirmation, am I turning off the door trigger error chrip from the menu setting?

Thanks!

Back to Top

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 15, 2015 at 8:25 PM / IP Logged

Yes you Are.it ignores the door trigger for 15 seconds upon unlock/lock

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.