the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

better way to use speaker outputs to amp?


Post ReplyPost New Topic
< Prev Topic Next Topic >
pullingees 
Member - Posts: 7
Member spacespace
Joined: February 03, 2015
Location: Florida, United States
Posted: February 03, 2015 at 6:56 PM / IP Logged  
Hello All,
Been out of car audio for about 10 years, I have a 2014 mustang Gt, my question is, is there a better way now to use speaker outs ( factory) to feed aftermarket amplifier. I will be using mmats sq2150 and 1400.1 to power some components in doors and a pro series mmats 12" in rear deck via pored enclosure firing into back glass.
2014 Mustang GT
Electronics factory, for now..
pullingees 
Member - Posts: 7
Member spacespace
Joined: February 03, 2015
Location: Florida, United States
Posted: February 03, 2015 at 7:21 PM / IP Logged  
Actually the mids and high amp is a sq 2175 I believe.
2014 Mustang GT
Electronics factory, for now..
sirhutson 
Member - Posts: 30
Member spacespace
Joined: January 29, 2015
Location: Texas, United States
Posted: February 04, 2015 at 9:18 AM / IP Logged  
You still will want to get a nice 6 channel line output converter. Like a audio control dq-61 or a lc7i. And if you are really into it grab a mosconi 6to8. These will all take the signal from your factory, let you adjust it to certain extents, and send it nice, hot and clean to your amps.
Hutson-
pullingees 
Member - Posts: 7
Member spacespace
Joined: February 03, 2015
Location: Florida, United States
Posted: February 04, 2015 at 10:22 AM / IP Logged  
I only have base model radio and 4 speaker locations, I assume you are saying to use a 6 channel LOC assuming I have a factory sub, correct? And to reiterate I have a non amplified non subwoofer and no center channel.
So in light of this is this still your recommendation? If so does this sq-61 generate a sub out with my speaker inputs?
2014 Mustang GT
Electronics factory, for now..
sirhutson 
Member - Posts: 30
Member spacespace
Joined: January 29, 2015
Location: Texas, United States
Posted: February 04, 2015 at 10:40 AM / IP Logged  
It doesnt matter if you have a factory sub. You still wanta good signal going into your sub amp. And yes these all generate sub out. It will give you front rear and sub.
Hutson-

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 22, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer