the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

single 12 vented into mustang rear glass


Post ReplyPost New Topic
< Prev Topic Next Topic >
pullingees 
Member - Posts: 7
Member spacespace
Joined: February 03, 2015
Location: Florida, United States
Posted: February 04, 2015 at 5:06 PM / IP Logged  
Looking to do a single 12" Mmats pro series into back glass of my 2014 mustang gt, being a coupe it is around a 45* angle. I will build enclosure and cut out the area for vent and sub and mount to rear deck from underneath ( inside trunk ).
Do you think I will have issue with port and sub firing directly into glass?
2014 Mustang GT
Electronics factory, for now..
sirhutson 
Member - Posts: 30
Member spacespace
Joined: January 29, 2015
Location: Texas, United States
Posted: February 04, 2015 at 5:47 PM / IP Logged  
That should sound pretty good. I see no issues aside from deck rattle, which is easily combated.
Hutson-

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer