2015 challenger rt

Home / the12volt's Install Bay / Car Security and Convenience / 2015 challenger rt

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: February 08, 2015 at 6:55 AM / IP Logged

Anyone have bypass info on a 2015 challenger push button start?nothing listed on fortin or idatalink...

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: December 04, 2015 at 11:03 AM / IP Logged

flashed and installed a ADS-CH7...this is a T harness style module,i plugged in at push button ign switch and connected can H(brn/red) to gry/wht and can L(brn/yell) to yellow at OBDII plug..connected rap shut down(gray) to purple at bcm white 48 pin plug.did not connect anything else.when programming the green LED did flash once after hitting unlock on 1fob,after that step there was no more response from the ads-ch7..

Back to Top

rstartfun

Member - Posts: 5

Joined: February 08, 2016

Location: Arizona, United States

Posted: February 27, 2016 at 8:51 AM / IP Logged

I have to do one of these today. I realize this was a few months ago but did you get it figured out? The only other thing I was thinking was the hood status wire?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.