help with Pyle DVD

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / help with Pyle DVD (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

starguitar

Member - Posts: 2

Joined: May 23, 2003

Location: United States

Posted: May 23, 2003 at 8:11 PM / IP Logged

I just installed a pyle dvd player and legacy monitor in my F150. The model is a PLTVD-91. Everything was working fine but I had to mess with the settings. I went to the "TV Type " setting and selected "PAL" which i'm to find out now is Europeon ?? Anyway. It started what looked like some software loading on the screen and I'm not sure if I switched it off or what but the DVD screen is black now. The remote for the screen does'nt respond. I only get DVD sound if I hold the power button on the screen in(WTF) The TV tuner still seems ok and I think the game section too. You can only access the general settings in the DVD mode so I can't see anything to change it back. I tried powering down (and disconecting) with no luck. Any way to set it back (a reset?) without sending it back?? PLEASE HELP. I've only had it 8days!!! Help the newbie if you can guys. Thanks, Gary

Back to Top

vseven

Copper - Posts: 60

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 27, 2003

Location: United States

Posted: May 23, 2003 at 8:21 PM / IP Logged

I would imagine there is some sort of reset, have you looked through your manual for something like a "reset to defult" setting. PAL is the TV standard for europe, NTSL (NTSC, something) is north america. So when you switched that you switched its mode, so now your monitor can't display the signal. If your TV supports PAL you can switch that to PAL and you should be able to see everything to switch it back. Also try Pyles tech support, there at www.pyleaudio.com.

Allan.

Back to Top

starguitar

Member - Posts: 2

Joined: May 23, 2003

Location: United States

Posted: May 23, 2003 at 8:41 PM / IP Logged

Hi, No nothing in the manual on a reset. In fact the "TV TYPES" were completly left out too. I have just written Pyle service and i'll ck what came with the monitor but I know that was pretty vauge too. Thanks for your reply :-)

Back to Top

jaymes

Copper - Posts: 47

Joined: May 31, 2003

Posted: June 02, 2003 at 8:56 PM / IP Logged

legacy monitors are evil

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

help with Pyle DVD

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.