the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Kerf: Wood glue vs resin vs resin/filler


Post ReplyPost New Topic
< Prev Topic Next Topic >
Flakman 
Copper - Posts: 365
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 25, 2005
Location: United States
Posted: June 16, 2015 at 12:37 PM / IP Logged Link to Post Post Reply Quote Flakman
I'm going to be doing some kerfs for a G37 box build. Most people use wood glue in the kerfs. I was wondering if resin with kitty hair or a resin/body filler mix would be better/stronger and still last a long time or should I stick with the wood glue?
The Flakman
I feel strange. I have deja vu and amnesia at the same time.
John | Manteca, CA

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, October 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer