the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 Toyota Yaris C/Locking upgrade module


Post ReplyPost New Topic
< Prev Topic Next Topic >
chassis 
Copper - Posts: 244
Copper spacespace
Joined: September 21, 2014
Location: South Africa
Posted: July 08, 2015 at 12:47 PM / IP Logged Link to Post Post Reply Quote chassis
Good day all/Howie!
I just wanted to know if the wiring of the the yaris 2006 model is exactly the same as the 2007 yaris.I've found the wiring info for 2007 on this site but just wanted to make sure.I'm installing a C/locking upgrade alarm module on this vehicle,it has keyless entry on the key,I need to get signal from the motor wires and also need to connect the sense wire to the key unlock wire.Can you also tell me what this mean (lock motor wire - yellow to orange) (unlock motor wire - pink to blue)that's for the 2007 model.So basically I just need to know if I can follow the wiring info for the 2007 model hatch,no info found for 2006.thanks in advance
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.
chassis 
Copper - Posts: 244
Copper spacespace
Joined: September 21, 2014
Location: South Africa
Posted: July 08, 2015 at 12:54 PM / IP Logged Link to Post Post Reply Quote chassis
2006 Toyota Yaris C/Locking upgrade module -- posted image.
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 08, 2015 at 2:42 PM / IP Logged Link to Post Post Reply Quote howie ll
Why would you need motor wires? C/Locking triggers (-) are found in the driver's kick panel, or body control adjacent to inst. panel.
Key sense probably yellow/black, this wire goes to ground when the key is inserted. Located adjacent to immobiliser ring on ignition switch.
PS motor wires probably in same plug as central locking in driver kick panel.
chassis 
Copper - Posts: 244
Copper spacespace
Joined: September 21, 2014
Location: South Africa
Posted: July 08, 2015 at 3:00 PM / IP Logged Link to Post Post Reply Quote chassis
I'm sorry for the little info.The alarm I'm linking up to existing factory keyless entry does not come with remotes,so i'm using the motor wires to switch the alarm on and of reversing polarity.I'm talking about the unlock switch wire,in order for the alarm to sense and not to disarm when moving the door knob.Sorry once again.talking about the ignition sense wire,why would an installer need that wire? For which purpose is it in vehicle security,I've never used it,is it used for remote start?thanks for the reply,i'll test around at the pin plucks
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.
chassis 
Copper - Posts: 244
Copper spacespace
Joined: September 21, 2014
Location: South Africa
Posted: July 10, 2015 at 12:03 PM / IP Logged Link to Post Post Reply Quote chassis
Appologies for asking such stupid questions,should have searched through the site 1st.I am finnaly done with the installation.its really amazing how you can reduce your installation time by doing all connections at the fusebox and kick panel. Doing research really helps a lot.I studied the pinout positions tested and connect like a pro.little did the the client know its my 1st time installing a security system in a yaris.took me one 1 and half hours including soldering.2006 Toyota Yaris C/Locking upgrade module -- posted image. I don't know if its still long but to me its quick compare to my other installations
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 10, 2015 at 12:10 PM / IP Logged Link to Post Post Reply Quote howie ll
It's good, the very first took me 3 hrs, a voyage of discovery, got it down to 45 mins. with ultrasonics.
There was no technical info back when it came out in Europe 04? Now the trick is to look at the alarm makers' install guides and work from there.
In your case you have to be very careful, the norms are US and Euro markets but S. American, S. African and S.E. Asia e.g. most pick up trucks come from Thailand, they can all vary, central locking, no central locking etc., different ignition colours so test.
Most Mazdas e.g. 2, 3 and 6 are Ford Fiesta, Focus and Mondeo but there are many wiring variations.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 10, 2015 at 12:13 PM / IP Logged Link to Post Post Reply Quote howie ll
Ignition sense is used on remote start installs notably Honda and Toyota. When the engine is running the factory and aftermarket fobs won't unlock the door. Grounding that wire from the alarm or remote start enables the lock/unlock from the remotes because the body control module thinks the key is in the ignition.
chassis 
Copper - Posts: 244
Copper spacespace
Joined: September 21, 2014
Location: South Africa
Posted: July 10, 2015 at 12:33 PM / IP Logged Link to Post Post Reply Quote chassis
I have notice what you saying about the wire color changes.since then I'm testing all wires before making connections.thanks for that,will also take it up more seriously. About the ignition sense wire,it makes 100% sense now,learning everyday.Technology is very slow here.I guess most people get it fitted to warm the engine up in the morning hey? Can't think of a other purpose.
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 10, 2015 at 12:38 PM / IP Logged Link to Post Post Reply Quote howie ll
Warm it up or cool it down in the summer.
IMPORTANT!!!
Don't confuse ignition sense with key sense.
Key sense is as above ignition sense will give you 12V+ on ignition, crank and engine run. Alarms need it so they can't be armed when the engine is running.
chassis 
Copper - Posts: 244
Copper spacespace
Joined: September 21, 2014
Location: South Africa
Posted: July 10, 2015 at 12:48 PM / IP Logged Link to Post Post Reply Quote chassis
Won't forget that.Any change in polarity on ingnition sense,or does it just ground when you insert the key?
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer