spacer spacer spacer spacer

GPS fleet management mounting

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 2
Member spacespace
Joined: October 19, 2015
Location: Virginia, United States
Posted: October 19, 2015 at 2:05 PM / IP Logged Link to Post Post Reply Quote autotronixva
What is the preferred method to mount these. When I do remote starts and alarms the module gets ziptied to a brace or thick bundle of wires. The GPS need to be located at the top of the dash and sometimes securing it properly can be difficult. Should I be using double sided tape or is there a type of adhesive or caulking that works well for this type of thing. Thanks.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, June 9, 2023 • Copyright © 1999-2023, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer