spacer spacer spacer spacer

Need a DIY Radar Detector pwr cord

Post ReplyPost New Topic
< Prev Topic Next Topic >
Copper - Posts: 54
Copper spaceThis member has made a donation to Click here for more info.spacespace
Joined: June 16, 2009
Location: Florida, United States
Posted: October 30, 2015 at 4:57 PM / IP Logged Link to Post Post Reply Quote radarcontact
My escort has an RJ11 port and I want to build a cord to go to either my SAE port or my powered USB port. I don't know if the USB delivers 12v or not...assuming it's 3v-5v; it powers my phone on my motorcycle. So the SAE is probably the port to use and I have SAE ends and lots of RJ11 lying around the workshop.
Anyone know which pair of wires I would use for hot and which pair for ground? Also what size inline fuse would you suggest?
Thanks as always!
// Radar //
Member - Posts: 7
Member spacespace
Joined: November 07, 2018
Location: Illinois, United States
Posted: November 13, 2018 at 9:55 PM / IP Logged Link to Post Post Reply Quote twelveez
were you able to find one?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, March 31, 2023 • Copyright © 1999-2023, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer