Upgrading VSS5000 on 07 mustang

Home / the12volt's Install Bay / Car Security and Convenience / Upgrading VSS5000 on 07 mustang

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

paul8274

Member - Posts: 15

Joined: August 28, 2015

Posted: December 13, 2015 at 11:06 AM / IP Logged

Had a 791VX that died after 6-7 years. Bought the VSS5000 and DSM200 at a cheap price.

My jeep has a 5x10 and DSM350+. I was wanting something on my mustang similar to my jeep. The VSS5000 was a plug and play swap from the 791. But now I'm missing the can bus feedback through my smart start and the GPS info.

DSM 250 or 350 will give me the GPS info, is there a reason to go with one over the other?

Will a dball 2 give me the can bus info? I know the DSM will plug into the existing plug but how would the dball 2 integrate?

I have a xkloader I used with my jeep.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.