Courtesy lights only work with OEM Remote?

Home / the12volt's Install Bay / Car Security and Convenience / Courtesy lights only work with OEM Remote?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: March 15, 2016 at 11:22 PM / IP Logged

Installed a Viper 5906V with DBALL2 Datalink module in an 09 Escalade and for some reason, the courtesy lights, puddle lights, etc. that usually come on for about 30 seconds with the factory remote / alarm do not work with the Viper remote. AFTER installing, I tried the oem remote and noticed that although it still works, the lights just stay on for about 5 seconds now (when disarming with the oem remote only).

Any ideas anyone? Thanks!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.