the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Gentex mirror, connector pin tool?


Post ReplyPost New Topic
< Prev Topic Next Topic >
zebra12 
Member - Posts: 1
Member spacespace
Joined: March 26, 2016
Location: California, United States
Posted: March 26, 2016 at 10:15 AM / IP Logged Link to Post Post Reply Quote zebra12
I bought a Gentex 341 with a 10 pin connector. I pushed the white tab on the factory connector (that goes into the back of the mirror) up, but I still am not sure how to release the wires from the 10 pin connector.
The holes in the front of the plug are too small for even a paper clip to slide in. Is there a special tool to depin the 10 pin connector?
Any advice on how to remove the wires from the factory plug would be greatly appreciated.
davep. 
Gold - Posts: 636
Gold spacespace
Joined: May 27, 2011
Location: California, United States
Posted: March 28, 2016 at 9:19 AM / IP Logged Link to Post Post Reply Quote davep.
On the long side, where the terminals are exposed, there is a little tab on the end towards the wire side. Push it down slightly, and tug on the wire. It comes right out.
racerjames76 
Silver - Posts: 581
Silver spacespace
Joined: November 22, 2008
Location: Ohio, United States
Posted: March 30, 2016 at 3:25 PM / IP Logged Link to Post Post Reply Quote racerjames76

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, September 28, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer